Natural Gas, Biogas, LPG, Landfill Gas Generator Sets

• Customization: Available
• Type: Self-Starting Diesel Generator
• Installation Method: Fixed
• Model NO.: GF2/3G-30
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: 1500rpm
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Ordinary
• Excitation Mode: AC Rotating Exciter
• Engine Type: Lovol
• Controller: Deepsea, Smartgen
• Fuel: Natural Gas
• Transport Package: Plywood Case
• Specification: 2000*1150*1600mm
• Trademark: YABO
• Origin: China
• HS Code: 85011100
• Production Capacity: 3000PCS/Year

Product Description

Genset working condition:

lAcceptable working conditions:
Ambient temperature : -10°C~+40°C
(antifreeze and water heater needed for below 0°C)
Relative humidity:< 90% (20°C)
Altitude:≤ 500m
 
l Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20°C, Relative Humidity: 30%.
 
lApplied gas:
 Natural Gas, Biogas, LPG, Landfill gas, Oil gas, Syngas, Coal mine gas
 Acceptable fuel gas pressure: 8~12kPa

CH4 content: for natural gas≥85% CH4 content: for biogas≥55%
Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)
H2S content≤200mg/Nm3
NH3 content≤20mg/Nm3
Impurities content≤30mg/Nm3;size≤5μm
Water content≤40g/Nm3, no free water.

NATURAL GAS generator Set

Technical Data
Genset Model	Prime Power (KW/KVA)		Engine Model	Clylinders	Bore×Stroke (mm)	Gas Consumption Rate (m3/kw.h)	Displacement (L)
	KW	KVA
NG2-30KW	30	37.5	1004NG	4	100×127	0.5-0.3	3.99
NG2-40KW	40	50	1006NG	6	100×127	0.5-0.3	5.98
NG2-90KW	90	112.5	1006-G6TAG	6	100×127	0.5-0.3	5.98
NG2-100KW	100	110	R615	6	126×130	0.5-0.3	9.7
NG2-120KW	120	132	R615	6	126×130	0.5-0.3	9.7
NG2-150KW	150	165	R618	6	126×150	0.5-0.3	11.2
NG2-160KW	160	200	D11	6	128×142	0.5-0.3	10.96
NG2-220KW	220	275	D15	8	128×142	0.5-0.3	14.62
NG2-320KW	320	400	D22	12	128×142	0.5-0.3	21.93
NG2-440KW	440	500	D30	16	128×142	0.5-0.3	29.24

2.Genset working condition :

ACCEPTABLE WORKING CONDITIONS:
Ambient temperature :	-40°C~+45°C
(antifreeze or hot water needed for below -20°C)
Relative humidity:	<90%(20°C)
Altitude:	≤1000m
NORMAL WORKING CONDITIONS:
Genset can run at rated power on the conditions:
Atmospheric Pressure:	100kPa
Ambient Temp:	20°C
Relative Humidity	30%.
APPLIED GAS:	Natural Gas, Biogas,Oil field gas
Acceptable gas pipeline pressure:	0.8~450kPa
Engine inlet pressure:	0.8~5.0kPa (80~500mmH2O)
CH4 content:	for natural gas ≥75%; for biogas≥40%
Sulphur content:	≤400ppm
Gas heat value:	≥5500kcal/Nm3 (23MJ/Nm3 )
Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)

 
3 Standard Scope of Supply:

1. Brand new gas engine, 90% parts include engine body , crank shaft, cam shaft, piston, cylinder head, etc made by Cummins with best quality

2. Brand new brushless France Leroy Somer alternator

3. Rating: 3 phases 4 lines. 400/230V, 50 HZ , 1500rpm, 0.8PF, IP22-23, Insulation class H

4. Radiator for 40°C/50°C ambient temperature

5. Ignition system adopted USA ALTRONIC

6. Emergency stop mounted

7. Battery,Battery cable and Battery charger

8. Standard tool box

9. Standard Accessory for installation (include bellows,silencer,flange,asbestos pad,Anti-rust water,screw )

10. Gas Train include Regulator valve,Electromagnetic Valve, Fire arrestor,Ball Valve (Chinese brand)

11. Testing report and maintenance manual.