Genset working condition:
lAcceptable working conditions:
Ambient temperature : -10°C~+40°C
(antifreeze and water heater needed for below 0°C)
Relative humidity:< 90% (20°C)
Altitude:≤ 500m
l Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20°C, Relative Humidity: 30%.
lApplied gas:
Natural Gas, Biogas, LPG, Landfill gas, Oil gas, Syngas, Coal mine gas
Acceptable fuel gas pressure: 8~12kPa
CH4 content: for natural gas≥85% CH4 content: for biogas≥55%
Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)
H2S content≤200mg/Nm3
NH3 content≤20mg/Nm3
Impurities content≤30mg/Nm3;size≤5μm
Water content≤40g/Nm3, no free water.
NATURAL GAS generator Set
Technical Data |
|
|
|
|
|
|
Genset Model |
Prime Power (KW/KVA) |
Engine Model |
Clylinders |
Bore×Stroke (mm) |
Gas Consumption Rate (m3/kw.h) |
Displacement (L) |
KW |
KVA |
NG2-30KW |
30 |
37.5 |
1004NG |
4 |
100×127 |
0.5-0.3 |
3.99 |
NG2-40KW |
40 |
50 |
1006NG |
6 |
100×127 |
0.5-0.3 |
5.98 |
NG2-90KW |
90 |
112.5 |
1006-G6TAG |
6 |
100×127 |
0.5-0.3 |
5.98 |
NG2-100KW |
100 |
110 |
R615 |
6 |
126×130 |
0.5-0.3 |
9.7 |
NG2-120KW |
120 |
132 |
R615 |
6 |
126×130 |
0.5-0.3 |
9.7 |
NG2-150KW |
150 |
165 |
R618 |
6 |
126×150 |
0.5-0.3 |
11.2 |
NG2-160KW |
160 |
200 |
D11 |
6 |
128×142 |
0.5-0.3 |
10.96 |
NG2-220KW |
220 |
275 |
D15 |
8 |
128×142 |
0.5-0.3 |
14.62 |
NG2-320KW |
320 |
400 |
D22 |
12 |
128×142 |
0.5-0.3 |
21.93 |
NG2-440KW |
440 |
500 |
D30 |
16 |
128×142 |
0.5-0.3 |
29.24 |
2.Genset working condition :
ACCEPTABLE WORKING CONDITIONS: |
|
Ambient temperature : |
-40°C~+45°C |
(antifreeze or hot water needed for below -20°C) |
|
Relative humidity: |
<90%(20°C) |
Altitude: |
≤1000m |
NORMAL WORKING CONDITIONS: |
|
Genset can run at rated power on the conditions: |
|
Atmospheric Pressure: |
100kPa |
Ambient Temp: |
20°C |
Relative Humidity |
30%. |
APPLIED GAS: |
Natural Gas, Biogas,Oil field gas |
Acceptable gas pipeline pressure: |
0.8~450kPa |
Engine inlet pressure: |
0.8~5.0kPa (80~500mmH2O) |
CH4 content: |
for natural gas ≥75%; for biogas≥40% |
Sulphur content: |
≤400ppm |
Gas heat value: |
≥5500kcal/Nm3 (23MJ/Nm3 ) |
Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.) |
3 Standard Scope of Supply:
1. Brand new gas engine, 90% parts include engine body , crank shaft, cam shaft, piston, cylinder head, etc made by Cummins with best quality |
2. Brand new brushless France Leroy Somer alternator |
3. Rating: 3 phases 4 lines. 400/230V, 50 HZ , 1500rpm, 0.8PF, IP22-23, Insulation class H |
4. Radiator for 40°C/50°C ambient temperature |
5. Ignition system adopted USA ALTRONIC |
6. Emergency stop mounted |
7. Battery,Battery cable and Battery charger |
8. Standard tool box |
9. Standard Accessory for installation (include bellows,silencer,flange,asbestos pad,Anti-rust water,screw ) |
10. Gas Train include Regulator valve,Electromagnetic Valve, Fire arrestor,Ball Valve (Chinese brand) |
11. Testing report and maintenance manual. |
Hebe Wang
FUJIAN XINYABO POWER TECHNOLOGY CO.,LTD | Tiehu industrial area,Fuan city,Fujian province,China