Biogas Generator Power Plan

Product Details
Customization: Available
Type: Self-Starting Diesel Generator
Installation Method: Fixed
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2017

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO9001:2008
Find Similar Products

Basic Info.

Model NO.
GF2/3B-30
Stroke
Four Stroke
Cooling Method
Water Cooling
Output Type
AC Three Phase
Speed
1500rpm
Conditions of Use
Land Use
Usage
Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit
Ordinary
Excitation Mode
AC Rotating Exciter
Engine Type
Lovol
Controller
Deepsea, Smartgen
Fuel
Natural Gas
Transport Package
Plywood Case
Specification
2000*1150*1600mm
Trademark
YABO
Origin
China
HS Code
85011100
Production Capacity
3000PCS/Year

Product Description

Biogas Generator Power Plan

Genset working condition:
lAcceptable working conditions:
Ambient temperature : -10°C~+40°C
(antifreeze and water heater needed for below 0°C)
Relative humidity:< 90% (20°C)
Altitude:≤ 500m
 
l Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20°C, Relative Humidity: 30%.
 
lApplied gas:
 Natural Gas, Biogas, LPG, Landfill gas, Oil gas, Syngas, Coal mine gas
 Acceptable fuel gas pressure: 8~12kPa

CH4 content: for natural gas≥85% CH4 content: for biogas≥55%
Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)
H2S content≤200mg/Nm3
NH3 content≤20mg/Nm3
Impurities content≤30mg/Nm3;size≤5μm
Water content≤40g/Nm3, no free water.

NATURAL GAS generator Set
Technical Data            
Genset Model Prime Power (KW/KVA) Engine Model Clylinders Bore×Stroke (mm) Gas Consumption Rate (m3/kw.h) Displacement (L)
KW KVA
NG2-30KW 30 37.5 1004NG 4 100×127 0.5-0.3 3.99
NG2-40KW 40 50 1006NG 6 100×127 0.5-0.3 5.98
NG2-90KW 90 112.5 1006-G6TAG 6 100×127 0.5-0.3 5.98
NG2-100KW 100 110 R615 6 126×130 0.5-0.3 9.7
NG2-120KW 120 132 R615 6 126×130 0.5-0.3 9.7
NG2-150KW 150 165 R618 6 126×150 0.5-0.3 11.2
NG2-160KW 160 200 D11 6 128×142 0.5-0.3 10.96
NG2-220KW 220 275 D15 8 128×142 0.5-0.3 14.62
NG2-320KW 320 400 D22 12 128×142 0.5-0.3 21.93
NG2-440KW 440 500 D30 16 128×142 0.5-0.3 29.24

2.Genset working condition :
ACCEPTABLE WORKING CONDITIONS:  
Ambient temperature :  -40°C~+45°C 
(antifreeze or hot water needed for below -20°C)  
Relative humidity: <90%(20°C)
Altitude: ≤1000m
NORMAL WORKING CONDITIONS:  
Genset can run at rated power on the conditions:  
Atmospheric Pressure:  100kPa
 Ambient Temp:  20°C
Relative Humidity 30%.
APPLIED GAS: Natural Gas, Biogas,Oil field gas
Acceptable gas pipeline pressure: 0.8~450kPa
Engine inlet pressure:  0.8~5.0kPa (80~500mmH2O) 
CH4 content: for natural gas ≥75%; for biogas≥40%
Sulphur content: ≤400ppm
Gas heat value: ≥5500kcal/Nm3 (23MJ/Nm3 )
Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)
 
3 Standard Scope of Supply:
1. Brand new gas engine, 90% parts include engine body , crank shaft, cam shaft, piston, cylinder head, etc made by Cummins with best quality
2. Brand new brushless France Leroy Somer alternator
3. Rating: 3 phases 4 lines. 400/230V, 50 HZ , 1500rpm, 0.8PF, IP22-23, Insulation class H
4. Radiator for 40°C/50°C ambient temperature
5. Ignition system adopted USA ALTRONIC
6. Emergency stop mounted
7. Battery,Battery cable and Battery charger
8. Standard tool box
9. Standard Accessory for installation (include bellows,silencer,flange,asbestos pad,Anti-rust water,screw )
10. Gas Train include Regulator valve,Electromagnetic Valve, Fire arrestor,Ball Valve (Chinese brand)
11. Testing report and maintenance manual.

 Hebe Wang 

FUJIAN XINYABO POWER TECHNOLOGY CO.,LTD |  Tiehu  industrial area,Fuan city,Fujian province,China
 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier