| Customization: | Available |
|---|---|
| Type: | Self-Starting Diesel Generator |
| Installation Method: | Fixed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical data | |
| Genset Model | GF2/3W-200 |
| Prime Power | 200KW/250KVA |
| Rated Voltage | 400/230V |
| Frequency | 50/60Hz |
| Power Factor | 0.8(lagging) |
| The regulating rate of steady voltage | ≤±0.5% |
| The regulating rate of instantaneous voltage | ≤-15%/ +20% |
| The time of steady voltage | ≤1.5sec |
| The waving rate of voltage | ≤1.0% |
| The regulating rate of steady frequency | ≤3% |
| The regulating rate of instantaneous frequency | ≤±10% |
| The time of steady frequency | 3sec |
| Dimension (L×W×H) (mm) | 2900*1000*1800 |
| Genset weight (kg) | 2500 |
| Diesel Engine | |
| Brand | Ricardo |
| Model | R6126AZLD |
| Number of Cylinders | 6 |
| Rotating Speed | 1500/1800RPM |
| Cycle | Four stroke |
| Type | waste gas turbine boost,direct spurting type |
| Bore×Stroke(mm) | 126*130 |
| Displacement(L) | 9.73 |
| Lubricating Capacity(L) | 49.7 |
| Speed Governor | Electrical |
| Cooling System | Water-cooled |
| Speed Stability (%) | ≤5% |
| Fuel Consumption at 100% Load | 208 g/kw.h |
| Starting Method | DC24V Electrical starting |
| Alternator | |
| Brand | XINYABO |
| Model | 274K-200 |
| Number of Phase | 3 |
| Connecting Type | Three Phase and Four Lines |
| Number of Bearing | 1 |
| Grading Protection | IP23 |
| Altitude | ≤1000m |
| Exciter Type | Brushless (AVR automatic voltage regulating) |
| Insulation Class | H degree |
| The components of the genset | |
| (1) Ricardo Diesel Engine; (2)XINYABO Alternator; (3) Control Panel | |
| Control Panel | |
| The control panel is Quadruplication protection control panel, with the display of frequency table/water temperature/schedule/battery voltmeter. The genset with low oil pressure, high water temperature, over speed emergency, stop and other pre-protection. | |
| Brand | Deepsea/ComAp |
| The control module gives digital readouts of: Generator voltage; Output frequency; Engine speed; Battery voltage; Engine hours run. The control module has indicators for failure information: Overspeed/underspeed, Emergency stop Low oil pressure; High water temperature Failure to start Battery charger failure Automatic shutdown occurs under: Low engine oil pressure; High engine water temperature; Overspeed/underspeed; Failure to start after three attempts. |
|
){kind=link}